Zoeller 63-0001 Premium Series M63 Sump Pump - 115V

Zoeller Pump Company 63-0001 Details

For a professional-grade submersible pump used for residential or light commercial dewatering, turn to this Zoeller 63-0001 Premium Series M63 sump pump. This sump pump features a durable, all cast iron construction with a corrosion-resistant powder-coated epoxy finish. This M63 model has stainless steel screws, switch arm, guard, and handle as well as a viton outer switch boot. Plus, there's no sheet metal parts that will rust or corrode and no screens to clog.

This sump pump is submersible and hermetically sealed for smooth operation with an automatic reset thermal overload protected motor. It features upper and lower sleeve bearings running in a bath of oil as well as a carbon and ceramic shaft seal. It also has a watertight, neoprene square ring between the motor and pump housing as well as a solid, buoyant polypropylene float. It's float-operated with a 2-pole mechanical switch that integrates advanced switch technology.

Additionally, this unit features a green Zoeller LED plug, which ensures easy visibility to know exactly when your pump has power. This new LED plug is especially helpful during troubleshooting, eliminating guesswork without requiring professional assistance on-site. Simply check to see if the vibrant green LED plug is lit up; if you can see the light, then you are good to go!

The entire unit is pressure-tested after assembly to ensure efficient operation. Powered by a 3/10 hp motor, this sump pump has a 1 1/2" NPT discharge, a max flow rate of 43 GPM, oil filled cooling, and can pass 1/2" spherical solids. The maximum temperature for effluent or dewatering is 130 degrees Fahrenheit. It requires a 115V electrical connection for operation.

Overall Dimensions:
Width: 7 7/8"
Depth: 10 1/16"
Height: 10 1/16"