Werner L6200 Series 6' Orange / Yellow Type IA Fiberglass Leaning Ladder L6206

Werner Co. L6206 Details

Enhance the operational efficiency in your workspace with this Werner L6200 series leaning ladder. This ladder is uniquely designed to lean against flat wall surfaces, wall corners, poles, and wall studs. It can be used in step ladder mode or leaning ladder mode to accommodate the task at hand. With single-action opening and closing, the rail latch simply locks the rear rail to the front rail to safely secure it in leaning mode. This centrally located latch makes it easy to switch between modes as needed. In step ladder mode it has a maximum reach of about 10' high, and in leaning mode it offers a maximum reach of about 9' high.

This ladder features double-riveted, slip-resistant Traction-Tred steps which maximize grip to prevent falls. It has a dropped rear rail pivot point, allowing the user to get closer to their work in step ladder mode. The LEANSAFE ladder top has a non-marring rubber bumper to protect your walls and holds tools to increase productivity. Curved foot pads on the front feet maximize surface contact with the ground, ensuring the ladder remains securely in place.

This Type IA ladder supports up to 300 lb. It features heavy-duty internal spreaders to lock the frame open and prevent the sides from twisting under heavy, uneven loads. It also has backup plates to reinforce all top connectors and a full set of rear horizontals. Every rivet is backed up by extra reinforcement to protect the rails, and the EDGE360 bracing protects the bottom of the ladder from every angle. This ladder is OSHA compliant and ANSI A14.5-2007 rated.

Overall Dimensions:
Base Width: 24"
Base Depth (Closed): 6"
Base Depth (Open): 38"
Height: 74 7/16"
Step Width: 3"
Capacity: 300 lb.