T&S B-1146-02A-CR4 Wall Mounted Workboard Faucet with 4 3/8" Gooseneck Spout and Wrist Handles
$201.57/Each
Ships free with
Earn up to $6.05 back (605 points)with a Webstaurant Rewards Visa® Credit Card
Usually Ships in 2-3 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- 9 11/16" tall swivel gooseneck spout with 4 3/8" length
- 2.2 GPM aerator
- 4" centers, 6 1/2" workboard base
- 1/2" NPT male inlets, tailpieces for 1/4" NPT included
- Cerama ceramic cartridges and wrist handles
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 5 lb.
- Spout Length
- 4 3/8 Inches
- Faucet Width
- 12 Inches
- Faucet Height
- 9 11/16 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- 4 Inches
- Finish
- Chrome
- Flow Rate
- 2.2 GPM
- Handle Type
- Wrist
- Material
- Brass
- Mounting Style
- Wall Mounted
- Mounting Type
- Workboard
- Pressure Rating
- 20 - 125 PSI
- Rough In
- 4 Inches
- Spout Clearance
- 6 1/16 Inches
- Spout Type
- Gooseneck
- Temperature Rating
- 40 - 180 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works B-1146-02A-CR4 Details
This T&S B-1146-02A-CR4 wall mounted faucet is an excellent choice whether you're looking to install a new water fixture or replace an existing one! It comes with a 9 11/16" tall swivel gooseneck spout, with a 2.2 GPM aerator to regulate the water flow without aerating the stream. The ceramic cartridge design also gives you enhanced reliability compared to traditional compression cartridges. In this design, two ceramic discs fit together to seal the water flow. Since there is no rubber seat washer, this results in fewer wear parts and a more reliable faucet. Wrist handles make turning the water on and off easy. 1/2" NPT male inlets on 4" centers make connecting it to your supply lines easy, and tailpieces for 1/4" NPT are included too.
Overall Dimensions:
Spout Length: 4 3/8"
Faucet Height: 9 11/16"
Faucet Width: 12"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:
Made in America
This item was made in the United States of America.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
NSF/ANSI 61 & 372
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
Frequently Asked Questions From Customers
Need Parts & Accessories?
Show replacement parts and accessories for T&S Brass and Bronze Works B-1146-02A-CR4 today!
Resources and Downloads for
T&S Brass and Bronze Works B-1146-02A-CR4
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources