$137.50/Each
Ships free with Plus
Usually Ships in 2-3 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- 1/2" NPS male shank
Shipping Restrictions
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 3.6 lb.
- Spout Length
- 4 1/16 Inches
- Faucet Width
- 2 1/4 Inches
- Faucet Height
- 4 5/8 Inches
- Cartridge Type
- Metering
- Faucet Centers
- Single
- Finish
- Chrome
- Flow Rate
- 2.2 GPM
- Handle Type
- Pivot Action
- Material
- Brass
- Mounting Style
- Deck Mounted
- Pressure Rating
- 20 - 125 PSI
- Spout Clearance
- 1 5/16 Inches
- Spout Type
- Cast
- Temperature Rating
- 40 - 140 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works B-0712-PA Details
Get control over the flow of water in your facility with this ADA Compliant T&S B-0712-PA pivot action metering valve. It comes complete with a spanner bit for flow duration adjustments, as well as a vandal resistant spout that sits 1 1/4" above the deck to provide easy on/off cold water flow to its B-0199-01 non-splash 2.2 GPM aerator.
The T&S B-0712-PA pivot action metering valve offers a 4 1/8" clearance from the center of the faucet to the center of the spout, as well as a 10 degree angle on the aerator.
Overall Dimensions:
Spout Length: 4 1/16"
Faucet Height: 4 5/8"
Faucet Width: 2 1/4"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:
CSA, Canada
This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Questions & Answers
Looking For Specific Info?
Get quick answers to product questions with our AI-powered search.
Frequently Asked Questions From Customers
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Resources and Downloads for
T&S Brass and Bronze Works B-0712-PA
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
Related Items
Wet Floor Signs
58 Products
Wet Mop Buckets / Wringers
100 Products
Restaurant Compliance Signs
435 Products
Commercial Kitchen Mats
140 Products