$538.17/Each
Login or enter your email to be instantly sent the price!
Start a Live Chat with a Customer Service rep to receive the price!
Mon-Fri 8AM-8PM EST
Sat & Sun: 9am - 4pm EST.
Earn up to $16.15 back (1,615 points)with a Webstaurant Rewards Visa® Credit Card
Usually ships in 1 business day
Having the right pre-rinse setup for your business can improve efficiency in your kitchen and dish room, and make life easier for you and your staff! This model is well-suited for most pre-rinse setups in a restaurant dishroom or warewashing area. It mounts easily to the wall and comes with a host of features to make installation and use as easy as possible, whether you need to replace an old faucet or you're using it on a brand new installation.
This item was made in the United States of America.
This unit comes with a 1/2" water connection for water supply.
"This pre-rinse faucet works as we intended. It reaches all three areas of our three compartment sink. No leaks or drips. It looks great and functions well. We would purchase this item again."
Read More ReviewsThe spray valve on this pre-rinse is capable of a 1.15 GPM flow rate. This helps you to conserve water and save money on your utility bill, and also makes it well-suited for most warewashing setups. An ergonomic and heat-resistant handle makes it easy to use even during a long and busy shift, while the hold-down ring lets you lock it in a continuous spray position for as long as you need.
The flexible stainless steel hose on this model provides great range of motion and lets you direct the water exactly where you need it. The spring helps it retain its shape and keeps the spray valve positioned above the sink.
This faucet mounts to the wall using a pair of 1/2” NPT female inlets with 2” flanges. Those inlets can adjust from 7 3/4” to 8 1/4”, allowing you to fit them directly onto your facility’s water lines with ease.
This faucet comes with lever handles. The cartridges feature ceramic discs that open and close to control water flow rather than the seat washer setup found in standard compression cartridges. This increases durability while reducing the number of moving parts, which in turn means you’ll replace these components less frequently. Additionally, this model comes with check valves to prevent cross flow.
Sometimes, it’s just more convenient to use a standard faucet. This pre-rinse has you covered with a 12” add-on swing faucet.
With its chrome-plated brass construction, this faucet provides a polished look with the durability you expect from an industry-leading faucet manufacturer.
Stability is important in any pre-rinse setup, and this model comes with a 6” wall bracket to help secure your unit to the wall.
This unit features T&S's innovative EasyInstall design to save you time when setting it up. The riser is designed with a lock nut and bushing that pop down into the faucet base, so that you only have to tighten the nut to secure the riser rather than threading it into the base.
Watch More Videos
The T&S Low-Flow models can save you money on water, sewer, and heating costs while saving as much as 77,000 gallons of water per year.
Speaker 1 (00:12): Here's an easy way to save water and save money at the same time. Replace your current spray valves and aerators with T&S Low-flow models. Watch this 15 second test comparing a T&S Low-Flow spray valve using only 0.65 gallons per minute, versus a standard spray valve. It's easy to see how you can save as much as 77,000 gallons per year. That's over $200 in water savings, or $2,300 in water, sewer, and heating savings combined. And here's the same test using faucets. The tube on the left is filled by a T&S Low-flow aerator, the tube on the right - with a standard faucet. We filled these tubes for just 15 seconds, and it's easy to see, the dramatic difference. What about over a year's time? You could easily waste hundreds of thousands of gallons each year, and that's money down the drain. So save water and save money by using T&S water conserving Low-flow spray valves and aerators.
Attention CA Residents:
Specsheet
Warranty
Repair Guide
Sales SheetA PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
4 reviews rated this 5 out of 5 stars.
1 reviews rated this 4 out of 5 stars.
0 reviews rated this 3 out of 5 stars.
0 reviews rated this 2 out of 5 stars.
0 reviews rated this 1 out of 5 stars.
Customers generally find this pre-rinse faucet to be durable, well-made, and effective in reaching all areas of a sink. It is praised for its high pressure and ease of installation. While some believe there are cheaper alternatives, the consensus is that its performance and quality justify the investment.
This AI-generated summary was created from real customer reviews
Verified Purchase
This faucet is great! The pressure is incredible, really cleans things off - perfect for per-rinsing before washing with soap. Easy to install and use, would definitely recommend T&S over other brands, its worth the extra.
Verified Purchase
Works great and seems to be very well made. I docked a star because I think you could find cheaper ones that do the job just as well.
Verified Purchase
Durable and a very well made faucet. The faucet handle has a stop latch to prevent over tightening the handles that can lead to frequent repairs. Most less expensive faucet DO NOT have this feature. The 12-inch hose sprayer can reach opposite ends of a 3-comp sink.
Verified Purchase
This faucet is fantastic- it gets really beat up over the course of business and shows no signs of harm or slowing down. Super helpful and necessary at a place without a dishwasher!
Verified Purchase
This pre-rinse faucet works as we intended. It reaches all three areas of our three compartment sink. No leaks or drips. It looks great and functions well. We would purchase this item again.
Leave a review of this product!
Customers can receive promotional credit when they post reviews.
