Regency 48" Mobile Gas Connector Hose Kit and Caster Placement System - 3/4"

Details

Keep your gas equipment working safely and efficiently with this 48" mobile gas connector hose kit from Regency. Having a good quality gas hose, and the right hose for your application, can mean the difference between a kitchen that keeps up with orders and a major safety hazard. It's important to replace a damaged hose immediately and to consider how you will be using your equipment before choosing a new hose.

This gas hose is 48" long with a 3/4" diameter and is intended for applications where the equipment is mounted on casters and will be moved on a regular basis for cleaning and maintenance. To aid with mobility, this hose features a 360-degree rotational fitting design that prevents the hose from twisting or kinking. It also comes with a quick disconnect that makes it convenient and safe to remove the gas equipment from the utility line and move it completely out of the way for service or cleaning.

The hose is made from stainless steel corrugated tubing to provide strength and flexibility, while a stainless steel braid keeps the hose from stretching. A PVC coating seals the hose and helps to keep grease and dirt from accumulating on it. It also comes with (2) elbows, a full port valve, and a restraining device for easy installation.

The included stainless steel caster placement system is designed for use with all caster-mounted commercial kitchen equipment and allows equipment to be consistently returned to its desired or design-specific location after cleaning and maintenance. This caster-stabilizing device features a flat center into which the equipment caster is rolled. Ideal for ensuring that your equipment always goes back into exactly the right position after maintenance or cleaning, this caster placement kit also lets you precisely lay out your kitchen equipment lineup where you have very little room to work with. This is especially helpful for equipment that is required to be under an exhaust hood, as this can be the most valuable real estate in your kitchen!

In addition to ensuring equipment returns to its proper place, the caster placement system promotes fire safety in your kitchen. For your kitchen's fire suppression system to work properly, all equipment under it needs to be aligned in the correct location. This caster placement set easily marks out where each piece of caster-mounted equipment goes so that it can be returned to the right spot, and it also helps to lock the equipment in place for added safety, reducing the risk of displacement and fire hazards.

The caster placement kit adds value by reducing the amount of time and labor it takes to move equipment for cleaning and routine maintenance. Its low profile design allows casters to be easily replaced in the placement system after equipment is moved, with a minimum of effort. In addition, it is made of 18-gauge type 304 stainless steel for long-lasting durability and corrosion resistance. The Regency caster placement system is easy to install thanks to its 2 included caster shocks and 8 screws and anchors. It is NSF listed and complies with NFPA codes 17A (5.6.4) and 96 (12.1.2.3).

Kit Includes:
- Caster placement system
- 48" mobile gas hose, 3/4" diameter
- Full port valve
- Restraining device
- Quick disconnect
- (2) Elbows

Hose Dimensions:
Diameter: 3/4"
Length: 48"

Caster Placement System Dimensions:
Length: 5 1/8"
Width: 4 1/8"
Height: 1/2"