Reviews for Regency WT-603034-16 30" x 60" 16-Gauge 304 Stainless Steel Commercial Work Table with Undershelf

Specs show top holds 600 lbs. Cart wobbles a little with my 160lbs pizza oven but is functioning if careful while rolling. Cart height with casters is 39.5", way too tall and dangerously unbalanced. 3 weeks after delivery a torn to shreds box came with two shorter legs (missing two.) Shorter legs, if you have all 4, would make the cart 36" tall with the casters. I ended up cutting the 4 longer legs down which was time consuming and requires special metal cutting tools.

We purchased this for a 250 lb dough sheeter to sit on. It has been a great purchase and holds the sheeter easily. We will soon be purchasing the extra shelf to go under for extra storage.

Order was shipped and received promptly. Problem was when I opened the box and pulled out the panels their was a medium size dent on the corner on the lower shelf. This dent was due to a round circle mark from the bottom side of the shelf in a three inch diameter circle. Protective tape on top side looked good. Pulled the top shelf out and immediately saw two dents about one third the way down the table. Both dents was about one and a half inches long and their was no visible dent marks in protective tape on top.. I know you get what you pay for but I would not complain if I put the dents in. Would not recommend this table unless you are going to cover the top.

AVOID! Falling apart after a year. We went with the 16 gauge, because most of what we do is "standard" duty - the tables are mostly just used for dinner prep - cutting boards, etc. We initially purchased 3 without back splash and 2 with back splash (all with undershelf). The undershelf came loose on all of them early on. We tried to tighten them, but 3 got to the point where we had to drill into the legs and bolt the shelf to the leg. The top is coming loose on 2 of them - to the point where we have concerns with someone injuring themselves from the wobbliness - the whole table shakes as you prep veggies.... One got so bad we actually built a brace under the backsplash and screwed the whole table to the wall. Not kidding. That bad.

Arrived in perfect condition, just what I asked for. Love how tall the levelling feet are; they allow you to get the table to a maximum height. Wish the tables were closer to countertop height but the feet will get you up to 34" without feeling flimsy or wobbly. Helps to have two, side by side and pushed against a wall for optimal sturdiness. The instructions are a little bewildering. They ask you to slide the undershelf down over the positioned legs. However, assembled upside down as it is, the legs have a curved segment where they join the feet . This makes it impossible for the undershelf to fit onto the legs from this direction. I had to remove the legs, then stack the undershelf on top of the tabletop, line up each leg space, place each leg through both holes, secure the set screws inside the table top, Read More

Using this table in our food truck I went with the 16 gauge because it is right in front of the serving window so I am constantly leaning on it and reaching out the window also it is used for prep when we are not in service so I thought the thicker gauge stainless would be better for that

Unlike some reviews I have seen, my table arrived in great condition and had no dents to the work surface. Overall I am extremely pleased with the table and glad I went for the 16 gauge over the 18. The table has not dented or warped even after pounding out many pork cutlets. The only thing I wish was better was that it was a bit more stable. I suspect the narrow feet may be the culprit and am curious to see if I can improve this at all. Overall I would definitely recommend this table to anyone looking for more counterspace in their kitchen.

This table is awesome! I put the next to my stainless steel Viking grill and created a perfect outdoor kitchen setup. I also added some plastic table risers and its a perfect height now to match the grill. Also ordered a flat top grill pan so my grill is now a full Waffle House style kitchen.

Excellent quality. Was exactly as described. No rustable parts which was why I picked it. Fast shipping and a great price.

Stud and give all the space you need I bought extra shelve for more space

I would recommend getting the regular 33" cart (table with 28" legs and casters) because I wanted 36" to match an island and pontied the cut-down. If you can't get your "customised" table you ordered - all of it, just buy the regular cart/table with casters included. It also assembled pretty poorly. These rails the leg collars fit into are not precision located so, yes, I assembled it with aid of a rubber mallet, but even with the slop in these collars/sockets - they absolutely did not line up properly. You tend to get what you pay for, except for the adjustable feet. I guess I left a tip... What I got was 36-1/2" tall and was shorted my 4 adjustable feet. I ordered a table with feet, the reduction and 4 casters. Where are my feet? I'll trade you my 4 - 1/2" extra tall "bonus" length for my missing feet.

This work table changed the entire look and feel of my kitchen and gave me some extra storage space...and I LOVE IT!!! Easy to assemble, sturdy, and nice to look at!

Well used for over one year and the worktop is still very nice. The initial help with customer service to set this up was smooth. Highly customizable to gain additional storage and maximize the usage, plus very sturdy, cleans easily (huge plus!), and does not wobble due to adjustable feet. Overall highly recommend, easy installation and this is a high quality item. Would purchase again.

Be ready to do your own metal working if you buy this table. Ours came with two different sized sleeves for the legs...a proper fitting sleeve on the bottom surface and a sleeve that was nearly 1/4" diameter bigger than the leg on the top surface. There is no way to secure the legs to the top surface and remove a huge wobble in the table. The setscrew is worthless and the table will fail over time. The top is not secured to the legs. It never will be designed like this...The table was manufactured with the incorrect sleeve attached to it. We were told by webstaurant that they could send new legs...which won't help because of the different sleeve diameters we are working with. We must cut off the bigger metal sleeves, buy new metal sleeves and attach them.  Read More

As you can see in the picture I have this holding up a 400lb half sized convection oven with no difficulty. It is durable and can hold a lot of weight without issues. It is also very easy to put together.

It is a beautiful table and you simply cannot beat the price. Regency makes truly quality stainless steel products for a fraction of the price of competitors

The Regency Stainless Steel Work Table is a wonderful addition to our bakery. We can always use more counter space! This work table is extremely durable and easy to clean, no matter what we spill on it!

This is a pretty decent stainless table with under shelf - especially at this price point. It scratches pretty easily but also cleans up well.

This table is sturdy with enough room for 2 cooks to prep food. We use this with the Regency 5" casters and the table moves easily where ever we need it. Plenty of room on the undershelf. Easy to clean.

This commercial work table with undershelf is great. If you need a little extra work space this table is for you. With the shelf you get extra space to store things...bonus!!!!

Great table, could have a tighter fit, be stiffer. The holes for the legs on the understide of the table have about 1/4" slop room that you can try to tighten with the provided set screws, but will always be there. Not enough to chatter, but enough for the table to flex horizontally when you're pushing on it. The top of the table relies on two strips of reinforcing metal, but if you're kneading dough on it, the top will flex downward a centimeter or two. This isn't bad for a table this price! I'm just saying you're not getting an table beyond human imagination in strength.

The 72" length fit perfectly in my space. The worktop has supports underneath that span the entire length so there is no deflection whatsoever. Easy assembly, delivered in great condition.

This table is perfect for a small spot in the kitchen! We installed casters and store our ice cream machine on this table! It's exactly what we needed to complete our kitchen!

Sturdy stainless steel table that I use in my kitchen for prep. I like the extra storage provided by the undershelf. Came with some dents from shipping, but Webstaurantstore support was helpful in making that right.

as always I am impressed with the customer service with webstaurant. I ordered the table and just knew I would get it in time to open for the season, when it had not shipped within the week, customer service marked it priority to make sure it was shipped out asap. recieved it in 2 days oh and by the way the table is great.

I'm a big fan of this prep table. It is stainless, NSF approved and very easy to clean. I could not imagine my kitchen without it. In my case it needed to me secured to the wall in order for it to not move too much when wiping down.

Fast to set up, sturdy, and easy to keep clean. I got an optional extra shelf with it, and am very happy with the entire system. It is very strong and has no trouble holding whatever we put on it.

very good stainless steel work table, looks very durable y with a lot space for work. you will have a nice good looking table for a long time.

great price on a great table. we researched stainlesss commercial tables and found you to have better pricing, we love more work space and have had no problems.

Purchased this table over a year ago. It has held up wonderfully. The stainless steel does scratch, but it doesn't look bad or affect the quality at all. The smaller kids in the house like to play on the bottom shelf and the table holds up fantastically. It never bows or shows any weakness.

love my tables, very nice looking and the material looks very durable. easy to put together but you will need an extra set of hands

This Regency 30" x 72" 16-Gauge 304 Stainless Steel Commercial Work Table with Undershelf is a perfect size for a middle island of a bakery. Large surface area and sturdy!

Prep table is a good size and fits many spaces. Nice heavy weight. The corners could be a little more rounded. The shelf beneath is a great thing to have.

These are very heavy duty tables. The undershelf is stainless steel, which was very important to me when I was looking for new tables. Assembly was a bit difficult, as the shelf didn't slide on easily, as shown in the video.

This table is a great, high quality unit. Looks attractive, was very easy to assemble, is very sturdy and cleans up easily. It was also a great value.

The Shelf is perfect it's a nice and small I got it to put one of the drawers on that they make because the drawers can't go on the 24 inch wide so I got a 30 by 36 and this will work perfectly

Couldn't find a better price anywhere even with shipping included. They arrived quickly and have held up great. We've had them for almost a year and other than scratches on the top they look like new.

This is a quality table at reasonable price. Shipping was unbelievably inexpensive because it was stocked, making the net expense considerably less than a lower quality table of the same size that wasn't stocked.

We used this table to hold some grab n go merchandiser equipment. It has held up well. If you want something a little more durable I'd recommend paying a little more for a thicker table

Great! Works great and is very sturdy, came fast and perfect! I have it holding a couple hundred pounds of glass tubing and stock. No scratches or dings and has supports down the middle so it doesn't bow