Reviews for Regency 24" x 24" 16-Gauge 304 Stainless Steel Commercial Work Table with Undershelf

Arrived in perfect condition, just what I asked for. Love how tall the levelling feet are; they allow you to get the table to a maximum height. Wish the tables were closer to countertop height but the feet will get you up to 34" without feeling flimsy or wobbly. Helps to have two, side by side and pushed against a wall for optimal sturdiness. The instructions are a little bewildering. They ask you to slide the undershelf down over the positioned legs. However, assembled upside down as it is, the legs have a curved segment where they join the feet . This makes it impossible for the undershelf to fit onto the legs from this direction. I had to remove the legs, then stack the undershelf on top of the tabletop, line up each leg space, place each leg through both holes, secure the set screws inside the table top, Read More

Overall a nice table, little disappointed with the lower shelf quality. The unit is nice looking but the finish on the lower side is not as nice as the upper surface. The protective covering was cut with a razor knife and that left scratches that are very evident once cleaned up. The upper table surface is strong and should hold up nicely for the use we need it for.

Unlike some reviews I have seen, my table arrived in great condition and had no dents to the work surface. Overall I am extremely pleased with the table and glad I went for the 16 gauge over the 18. The table has not dented or warped even after pounding out many pork cutlets. The only thing I wish was better was that it was a bit more stable. I suspect the narrow feet may be the culprit and am curious to see if I can improve this at all. Overall I would definitely recommend this table to anyone looking for more counterspace in their kitchen.

Order was shipped and received promptly. Problem was when I opened the box and pulled out the panels their was a medium size dent on the corner on the lower shelf. This dent was due to a round circle mark from the bottom side of the shelf in a three inch diameter circle. Protective tape on top side looked good. Pulled the top shelf out and immediately saw two dents about one third the way down the table. Both dents was about one and a half inches long and their was no visible dent marks in protective tape on top.. I know you get what you pay for but I would not complain if I put the dents in. Would not recommend this table unless you are going to cover the top.

Excellent quality. Was exactly as described. No rustable parts which was why I picked it. Fast shipping and a great price.

This is great for my harvest right large freeze dryer. I also have another one for my large heavy Afinna printer. Love these. Easy to clean and getting the wheels are great! Fast shipping and great customer service!

Stud and give all the space you need I bought extra shelve for more space

I would recommend getting the regular 33" cart (table with 28" legs and casters) because I wanted 36" to match an island and pontied the cut-down. If you can't get your "customised" table you ordered - all of it, just buy the regular cart/table with casters included. It also assembled pretty poorly. These rails the leg collars fit into are not precision located so, yes, I assembled it with aid of a rubber mallet, but even with the slop in these collars/sockets - they absolutely did not line up properly. You tend to get what you pay for, except for the adjustable feet. I guess I left a tip... What I got was 36-1/2" tall and was shorted my 4 adjustable feet. I ordered a table with feet, the reduction and 4 casters. Where are my feet? I'll trade you my 4 - 1/2" extra tall "bonus" length for my missing feet.

This is a good quality work table we have had it installed in our food truck for approximately a year it was easy to assemble. it is good and sturdy the stainless steel is quality it does not rust even where we had to drill a hole to pass a conduit through it for the fire suppression.

This work table changed the entire look and feel of my kitchen and gave me some extra storage space...and I LOVE IT!!! Easy to assemble, sturdy, and nice to look at!

Well used for over one year and the worktop is still very nice. The initial help with customer service to set this up was smooth. Highly customizable to gain additional storage and maximize the usage, plus very sturdy, cleans easily (huge plus!), and does not wobble due to adjustable feet. Overall highly recommend, easy installation and this is a high quality item. Would purchase again.

As you can see in the picture I have this holding up a 400lb half sized convection oven with no difficulty. It is durable and can hold a lot of weight without issues. It is also very easy to put together.

This is great quality stainless steel commercial work table. The package arrived very fast. The price is affordable and it is worth to have one in restaurant.

It is a beautiful table and you simply cannot beat the price. Regency makes truly quality stainless steel products for a fraction of the price of competitors

The Regency Stainless Steel Work Table is a wonderful addition to our bakery. We can always use more counter space! This work table is extremely durable and easy to clean, no matter what we spill on it!

This commercial work table with undershelf is great. If you need a little extra work space this table is for you. With the shelf you get extra space to store things...bonus!!!!

The 72" length fit perfectly in my space. The worktop has supports underneath that span the entire length so there is no deflection whatsoever. Easy assembly, delivered in great condition.

This is a good quality stainless steel table. I would recommend it to someone who needs a long lasting prep table. I attached a bolt on overshelf to it, and it works great!

this table offer the backsplash that really help you to keep clean your place, this is table is make from a stainless steal material ideal for coffee shops and to go places

The Regency tables are all very well priced and sturdy. I also won't order tables without a backsplash anymore after using this one. Very nice to not have to worry about small items falling back behind your work tables.

Quality and Unbeatable Prices best describes Webstuarantstore! WOW Perfect addition for my kitchen excellent table I Will not shop anywhere else. Shipping is an A

unboxed it super excited to surprise my wife with her new work station for potting plants, and found three of the 4 corners bent/damaged. Come on shipping and freight carrier!!!

We purchased this countertop and other pieces as part of a complete kitchen renovation. Overall, we are very satisfied with the durability versatility and overall structure of the item. This countertop has been able to hold up to our versatile cooking needs as well as store all of our equipment, dishes, etc. The simply was rather easy and did not take any special tools or experience to accomplish. The biggest critique with this item, the extremely sharp edges on the corners and the other side of the countertop. We met it this injury risk by putting so much tape around the perimeter and then all the sharp areas.

Nice table. Toughest part of assembly is stripping off the protective cover. Sadly, that protective coating is not sufficient to stand up to the ineptitude of FedEx. They are like the "Soup Sandwich" of shippers. Left the boxes leaning against my garage door instead of on the "Covered" verandah 8 feet to the right. Of course the bur damage is right smack in the middle of the table. Perhaps heavier cardboard boxes for the legs or shipping caps for the ends? Not sure how I will correct that. Fairly sure I can tap out the dent in the shelf. Should have taken pics of box but thought Styro Blocks and coating safeguarded things. Wrong

Great table bought 2 using for food truck. Had for months no rust and is stable and plan to use for the long run. Came quick and as described.

Have had ours a year. It is sturdy, easy to adjust the feet to level, and it has stood up to multiple mixers operating on it without the joints loosening. Good table for the price. Lost one star because it came dented

Very sturdy. Easy to assemble. Looks great. Absolutely satisfied.

Steel is of excellent quality, it is easy to clean and has never failed me. The price of this product is quite good and reasonable. My chefs prefer it and I highly recommend it.

Super easy to build. Took maybe 15 minutes. Great weight of the pieces and is very stable and sturdy.

This was another table we purchased to get our restaurant ready to open and we couldn't be happier with it. Easy to assemble and fits our space perfectly. It also holds quite a bit of product as well!

The table seems heavy duty and sturdy but the assembly has been difficult. The holes aren't drilled well or lined up correctly. We have to tap new holes to make things go together. Also have to raise up the bottom shelf by 6" or so to make it sit right. And have stripped all the provided screws, so need to get new. I'm disappointed that this has been such a project after choosing what I thought was a decent quality table. I won't be getting any more Regency tables for our bakery.

This one is not the easiest to assemble and it took some time to do it but it seems very durable. Compared to other top brands, this is definitely worth it.

Build quality seems great, issues with careless manufacturing. The protective film had to be removed to weld the corners but it was removed by cutting it with a razor blade. This left scratches in all corners and there are numerous small scratches all over the rest of the table surface.

I bought this table to replace a termite-destroyed potting bench. It arrived 4 days after the order. The shipping box had slight shipping damage, but the table was in perfect condition. Assembly was very easy and only took an hour. The table is very sturdy and can hold a lot of weight. The 16-gauge metal was pretty thick and well finished. The nuts on the support rails did need a final tightening. The leg adjustment feet were good quality. Overall, a very nice table for the price. Assembly tips: The legs must go through the bottom shelf (top of leg first) prior to inserting the legs into the top attachments. The adjusting feet will not fit through the bottom shelf brackets. If you attach the drawer to the table, you need to drill holes. Rember that drilling metal requires Read More

A lot of good, but also some bad. I like that unlike so many other tables this one has a bigger under shelf that comes up right around the legs, instead of sticking close to the inner diameter of the legs. But like other regency products their QA is lacking in my current experience, lose and even missing bolts, with one even over torqued to the point it was sheared off. I might have just been unlucky, but 4/5 of the regency products I've ordered had at least a minor defect.

We bought this to install a pitcher filler. It sits next to our ice machine and is very handy. This table is solid and just the perfect size for what we needed.