Hatco S-30 Imperial Booster Water Heater 30 kW - 16 Gallon, 208V, 3 Phase
$4,282.30/Each
Ships free with
Earn up to $128.47 back (12,847 points)with a Webstaurant Rewards Visa® Credit Card
Installation Services
Special Order Shipping
An estimated delivery date will be provided after placing the order
Product Overview
- 16 gallon storage capacity
- Castone lined tank
- Step loads to reduce energy consumption
- 30 kW
- 208V, 3 Phase
- Quantity
- 1/Each
- Shipping Weight
- 214 lb.
- Width
- 23 1/2 Inches
- Depth
- 23 Inches
- Height
- 31 3/8 Inches
- Amps
- 83.3 Amps
- Hertz
- 60 Hz
- Phase
- 3 Phase
- Voltage
- 208 Volts
- Wattage
- 30 Kilowatts
- Flow Rate
- 172 - 301 GPH
- Power Type
- Electric
- Tank Capacity
- 16 Gallons
- Usage
- Heavy Duty
Hatco S-30 208/3 Details
The space saving Hatco S-30 30 kW Imperial booster water heater has a 16 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware! This electric booster heater is factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high-temperature limit switch, and features fiberglass insulation to minimize heat loss.
To help reduce energy costs, this unit operates by step loading, or using its heating elements only as needed. When first turned on, the booster heater uses the first of its several heating element banks; as more demand is placed on creating hot water, the other banks of elements will begin to heat, one after another. This process limits how many elements are operating at any given time to ensure that energy is not wasted.
A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs.
- Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easy servicing
- Gauges for temperature / pressure
- Stainless steel front panel and powder coated body provide long-lasting durability
- Metal sheathed heating elements
- 6" legs
Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty.
Overall Dimensions & Specs:
Width: 23 1/2"
Depth: 23"
Height (including legs): 31 3/8"
Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 301 GPH
Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 172 GPH
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:
Made in America
This item was made in the United States of America.
UL Classified, US & Canada
This product has been certified by the Underwriters Laboratories (UL) for safe use against a limited range of hazards or usage conditions, within applicable safety standards required for safe use in the United States and Canada.
Hardwired
This product must be hardwired by a professional; it does not plug into a standard wall outlet.
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
Frequently Asked Questions From Customers
Need Parts & Accessories?
Show replacement parts and accessories for Hatco S-30 208/3 today!
Resources and Downloads for
Hatco S-30 208/3
Specsheet
Manual
Warranty
Brochure
BrochureA PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.
Leave a review of this product!
If you’ve used this product, leave a review to tell us and other customers what you thought about it. Receive up to $16 in promotional credits for submitting one of the first text, photo, or video reviews for this item.
Write a text review
Earn $2.00
Post a product photo
Earn $4.00
Post a product video
Earn $10.00
- Write a text review
Earn $2.00 - Post a product photo
Earn $4.00 - Post a product video
Earn $10.00