$4,684.00/Each

This product is no longer available. We've left this page up for reference only.

Usually Ships in 3-4 Months from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 50 lb. oil capacity
  • Thermatron temperature controller for superior oil temperature control
  • Has (4) 6" diameter tubes
  • 100,000 BTU / hour
  • Stainless steel fry pot
  • Includes 2 twin fry baskets
  • Wide cold zone
  • Natural gas

Shipping Restrictions

This item cannot ship to CO, DC, MA, NJ, NV, NY, OR, RI, VT or WA
UPC Code:400011645694

Frymaster HD50GT NAT Specs

Quantity
1/Each
Shipping Weight
180 lb.
Width
15 1/2 Inches
Depth
31 1/4 Inches
Height
45 Inches
Fry Pot Width
14 Inches
Fry Pot Depth
14 Inches
Fry Pot Height
3 1/2 Inches
Amps
1 Amp
Phase
1 Phase
Voltage
120 Volts
Burner Style
Tube
Cabinet
Stainless Steel
Capacity
50 lb.
Features
Energy Star Qualified Made in America NSF Listed
Gas Connection Size
3/4 Inches
Number of Fry Baskets
2 Fry Baskets
Number of Fry Pots
1 Fry Pot
Plug Type
NEMA 5-15P
Power Type
Natural Gas
Split Pot
Without Split Pot
Total BTU
100,000 BTU
Type
Gas Floor Fryers

Frymaster HD50GT NAT Details

If you're looking for a fryer designed for high volume frying and maximum energy efficiency, then this Frymaster HD50G natural gas 50 lb. Decathlon gas floor fryer will fill your need! This tube type fryer has (4) 6" diameter tubes that provide 36% more surface area of heat transfer, resulting in extended oil life, low gas consumption per pound of food cooked, and less heat going unused up the vent and your kitchen.

This unit features the innovative Thermatron temperature controller, which responds almost instantly to changes in cooking loads to lower gas consumption and reduce idle costs. It ensures pinpoint accuracy when measuring oil temperature and allows for high production and fast recovery times.

This gas floor fryer has a wide cold zone with a 1 1/4" to 1 1/2" full-port IPS ball-type drain valve and 3" drain line for quick oil and sediment draining. Its forward sloping bottom also helps collect and remove sediment from this unit's stainless steel fry pot, which makes routine maintenance necessary less often. This fryer's front, sides, and doors are all constructed of stainless steel for longtime durability, and it comes with two twin fry baskets.

-100,000 BTU per hour

-14" x 14" x 3 1/2" frying area

-Electronic ignition

-Melt cycle and boil-out mode

-6" steel legs with 1" adjustment

-120V electrical connection required

Overall Dimensions:
Left to Right: 15 1/2"
Front to Back: 31 1/4"
Height: 45"

Please Note: For all orders shipping outside of the United States a 15% upcharge will be applied.

Attention CA Residents:
  • CSA Design, US

    CSA Design, US

    This item has been certified by the Canadian Standards Association (CSA) to meet applicable certification requirements for gas-fired products used in the United States.

  • Energy Star Qualified

    Energy Star Qualified

    This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • 3/4" Gas Connection

    3/4" Gas Connection

    This unit comes with a 3/4" gas connection to be installed by a professional.

  • CSA Blue Flame, Canada

    CSA Blue Flame, Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for gas-fired products in Canada.

  • CSA, US and Canada

    CSA, US and Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

Need Parts & Accessories?

Show replacement parts and accessories for Frymaster HD50GT NAT today!

Resources and Downloads for
Frymaster HD50GT NAT

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Please note that this item is subject to a 15% export warranty administration fee for all international orders.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.