Chicago Faucets 700-COLDABCP Deck-Mounted Single-Hole Single-Supply Faucet with Cast Brass Spout
$139.99/Each
Quick Shipping
Usually ships in 1 business day
Product Overview
- Durable, cast brass construction and polished chrome finish
- Pressure compensating Softflo aerator releases water at 2.2 GPM
- Stylish cast brass spout
- Vandal-proof 3" cross handle is color coded for easy identification
- Quaturn compression operating cartridge controls water flow and prevents leaks
Shipping Restrictions
- Quantity
- 1/Each
- Shipping Weight
- 2.1 lb.
- Handle Length
- 3 Inches
- Spout Length
- 3 1/2 Inches
- Faucet Width
- 3 Inches
- Faucet Height
- 3 3/8 Inches
- Faucet Centers
- Single
- Finish
- Chrome
- Flow Rate
- 2.2 GPM
- Handle Type
- 4 Arm
- Installation Type
- Deck Mounted
- Mounting Style
- Deck Mounted
- Mounting Type
- Adjustable
- Pressure Rating
- 20 - 125 PSI
- Rough In
- Single
- Spout Clearance
- 1 1/2 Inches
- Spout Type
- Cast
- Sprayer
- Without Sprayer
- Temperature Rating
- 140 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
Chicago Faucet Company 700-COLDABCP Details
Optimize water efficiency and regulate usage by outfitting your sink with this Chicago Faucets deck-mounted single-hole single-supply faucet with cast brass spout. Designed with a cast brass spout, this faucet combines functionality with style. This unit is equipped with a pressure compensating Softflo aerator that releases a soft, non-splashing flow of water at 2.2 GPM. This unit has a rated operating pressure of 20 to 125 PSI and a rated operating temperature of 40 to 140 degrees Fahrenheit for optimal performance. With its durable, cast brass construction and polished chrome finish, this faucet has a total lead content of less than or equal to 0.25% for your safety.
The vandal-proof 3" cross handle is color coded for easy identification. Control water flow and prevent leaks with the help of the Quaturn compression operating cartridge. The single-hole, deck-mounted design is easy to install, and it uses 1/2" NPSM supply inlets and a coupling nut suitable for 3/8" or 1/2" risers.
Overall Dimensions:
Spout Length: 3 1/2"
Faucet Height: 3 3/8"
Faucet Width: 3"
Attention CA Residents:
U.S. Green Building Council (USGBC)
This company is a certified USGBC member. The USGBC is an organization that promotes sustainable building practices, including saving energy, using fewer resources, and reducing waste.
Buy American Act Compliant
This product complies with the provisions of the Buy American Act.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
ICC-ES Low Lead NSF/ANSI 372
This item has been tested by the ICC-ES to meet NSF/ANSI 372 standards for drinking water lead content.
ICC-ES Drinking Water NSF/ANSI 61, Section 9
This item has been tested by the ICC-ES to meet NSF/ANSI 61, Section 9 standards for drinking water.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
Frequently Asked Questions From Customers
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Resources and Downloads for
Chicago Faucet Company 700-COLDABCP
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources